Biogas biological desulfurization technology includes biofiltration, biosorption and trickle filtration. The three systems are open systems, and their microbial populations change with environmental changes. In the process of biogas biological desulfurization, the oxidized sulfur-containing pollutants can be removed only after they are biologically reduced to sulfide or H2S, and then biologically oxidized to elemental sulfur. In most bioreactors, microorganisms are mainly bacteria, followed by fungi, and there are few yeasts. The commonly used bacteria are Thiobacillus ferrooxidans, Thiobacillus denitrificans and Thiobacillus excretors of the genus Thiobacillus. The representative of success is Thiobacillus ferrooxidans, whose good pH value is 2.0 ~ 2.2.
Wet desulfurization of biogas can be divided into physical absorption method, chemical absorption method and oxidation method. Physical and chemical methods have the problem of hydrogen sulfide reprocessing. The oxidation method uses alkaline solution as absorbent and oxygen carrier as catalyst to absorb H2S and oxidize it into elemental sulfur. The wet oxidation method dissolves the desulfurizer in water, and the liquid enters the equipment and mixes with biogas. Hydrogen sulfide (H2S) in biogas reacts with the liquid to produce elemental sulfur. The liquids that absorb hydrogen sulfide include sodium hydroxide, calcium hydroxide, sodium carbonate Ferrous sulfate, etc. With mature oxidation desulfurization method, the desulfurization efficiency can reach more than 99.5%.
The above is a detailed introduction about biogas desulfurization. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.hdtvorigin.com